Proto-pasta Conductive PLA 1.75mm 10 Metre Sample

Proto-pasta Conductive PLA 1.75mm 10 Metre Sample

£5.63 £6.76 inc. VAT

Out of stock

£5.63 £6.76 inc. VAT

Proto-pasta Conductive PLA can be used to print and complete circuits, as well as used to create a variety of touch sensitive and interactive devices, jewelry and toys. FREE Delivery via Royal Mail 1st class for sample orders

Availability: Out of stock SKU: 36328

Want to be notified when this product is back in stock?


Another unique filament to add to your collection.  Need some ideas to kickstart your imagination?  Here are some links to circuitry information and tutorials;

Have you ever wanted to create something with your 3D printer that includes electronics? Maybe an LED, touch sensor, or some other genius invention to solve the worlds problems? Then Proto-pasta Conductive PLA is the perfect material for you.

How Conductive Is It?
The measure normally used to characterize a conductor is volume resistivity with the units of Ohm-cm. This can be confusing because it is not obvious what it means like miles per hour. It is simply the resistance through a 1cm X 1cm X 1cm cube of material, with full sheet contact at 2 opposing surfaces. It is often misprinted as ohm/cm which is not a common unit of measure.

We measured the conductivity using a fixture we machined that clamps a sample between 2 sheet conductors and 1cm cubes printed on a Printrbot Simple Metal and machined from solid resin. Here are the results:
Volume resistivity of molded resin (not 3D Printed): 15 ohm-cm
Volume resistivity of 3D printed parts perpendicular to layers: 30 ohm-cm
Volume resistivity of 3D printed parts through layers (along Z axis): 115 ohm-cm
Resistance of a 10cm length of 1.75mm filament: 1.8Kohm
Resistance of a 10cm length of 2.85mm filament: 600ohm

Suggested Applications
Proto-pasta Conductive PLA is a great choice for low-voltage circuitry applications, touch sensor projects, and using prints to interact with touch screens (which require low conductivity, that’s why you can’t use your smart phone screen with gloves on). As a general rule, anything you can run through a 1K resistor should be doable with our material (if you design the conductors to be the right size). This will easily run a low current Arduino, if you are not powering much with it. Also, experiment with ESD or 3D printed bearings!

What is it made out of?
Proto-pasta Conductive PLA is a compound of Natureworks 4043D PLA, a dispersant and conductive carbon black. In filament form, it is quite flexible, and is compatable with any PLA printing printer.

Strength and Performance
We have not done substantial mechanical testing on this product but have some subjective parameters that should be useful in comparing this material with others:
Strength: Fair strength. More flexible than PLA, but less layer adhesion
Stiffness: Low, semi-flexible
Heat Resistance: Similar to PLA, use below 50C
Layer Adhesion: Fair layer adhesion. Not as good as normal PLA
Flexibility: Filament is quite flexible but will break if bent repeatedly (particularly 2.85mm). Printed parts are rigid if more than a mm or two thick. Thin sections are somewhat flexible but fail along layer lines if flexed more than a few times.
Failure Mode: If flexed to breakage, failure will be along layer lines.
Warping: Very low warping
Dual-Head compatibility: Compatible with (sticks to) PLA in dual material prints

Print Settings
Proto-pasta Conductive PLA is quite easy to print and is compatible with most printers that can print PLA.
1.15 g/cm3 (1500 kg/m3)
Bed Temp (if available, is not required): 50? C
Hot End Temp: 215 230? C (we run it on the hotter side to encourage layer adhesion)

Above Information courtesy of Proto-pasta


Additional information

Weight0.1 kg
Filament Brand


Filament Colour


Filament Diameter


Filament Length

10 Metres


There are no reviews yet.

Be the first to review “Proto-pasta Conductive PLA 1.75mm 10 Metre Sample”

The maximum upload file size: 5 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here

You may also like…