Reflow rPLA Berry Transparent 98% Recycled 3D Printing Filament 1.75mm 1Kg
£36.44 £43.73 inc. VAT £32.80 £39.36 inc. VAT
Reflow Candy Range rPLA is a bioderived material, recycled from food packaging. The material has over 98% recycled content, yet matches the print performance and surface quality of the best transparent virgin materials.
- Description
- What is PLA?
- Additional information
- Reviews (0)
Description
@3dfilaprint Check out the new #transparent #recycled #candy #pla from #reflow available #now on our #website #recycledfilament #biodegradable #plastic #recycling #3dprinter #3dprints #3dprint #3dfilament #3dfilaments #3dprinting #3dprinttok #3dprintok #3dfilaprint #materials #filament #spools ♬ Candy Shop – 50 Cent
Reflow rPLA Candy Range is a bioderived material, recycled from food packaging. The material has over 98% recycled content, yet matches the print performance and surface quality of the best transparent virgin materials.
Reflow of the Netherlands has pioneered an approach to recycling discarded plastic into a range of exceptional sustainable materials for 3D printing. They source the highest quality streams from leading recyclers and work closely with scientific institutions to optimize their filament range. When you print with Reflow you’re supporting an established network of recyclers, Makers, and designers in tackling plastic pollution while co-creating meaningful work. Reflow rPLA is a bioderived material originally produced from corn starch but recycled again from food packaging waste sourced in the Benelux region. It’s easy to print with, durable with excellent print quality. Source Traceability PLA is a highly versatile biopolymer that is economically efficient to synthesize and possesses biodegradable capabilities under the right conditions. It has a range of common applications from cardiovascular implants or PPE in healthcare as well as uses like plastic films, bottles, and straws in packaging. Our rPLA is sourced from a consistent stream of food packaging waste, collected and pelletized by a leading recycler in the Benelux region. 
rPLA. Bioderived, Easy to Print with Impeccable Surface Finish PLA or Polylactic acid is a bioderived plastic and the leading filament choice for creators. Our material’s original source is corn starch. While PLA can be broken down at the end of life, it does not naturally decompose at speed without industrial composting assistance. That way, by taking PLA food packaging and creating rPLA filament, were extending its life by another cycle. Our rPLA filament prints with accuracy and consistency on all setups, exhibiting flawless surface finish and print quality to produce highly visual and durable finished products. 
These settings are a good steer for printing with this material across a variety of devices. However, optimum settings may vary between printers: 
PLA
Overview
PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.
PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment.
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water.
Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.
Printability
Very Easy
Pros
- Low Cost
- Easy to Print
- Eco Friendly
- Does Not Warp
Cons
- Less robust than other materials
- Vulnerable to Water and sunlight
Recommended Settings
Print Temp
180°C -210°C
Cooling Fan on
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 1 kg |
|---|---|
| Cardboard Spool | Yes |
| Filament Brand | Reflow |
| Filament Colour | Blue |
| Filament Diameter | 1.75mm |
| Filament Length | 367 Metres |
| Filament Type | PLA |
| Filament Weight | 1Kg |
| Recycled | Yes |
| Filament Weight | 1Kg |
| Filament Range | Reflow rPLA |
Be the first to review “Reflow rPLA Berry Transparent 98% Recycled 3D Printing Filament 1.75mm 1Kg”
You must be logged in to post a review.
Reviews
There are no reviews yet.