3DXTech ULTEM Support Material (Now Thermax) Natural 1.75mm 250gms

ULTEM Support Material (Now re-branded as Thermax High Temp Support Filament) Natural 1.75mm 250gms spool.  The material is exactly the same just the brand name has changed.  This material works with a variety of high temperature 3D printing filaments.

Thermax High-Temp Support Filament

Our high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials.

ThermaX HTS High-Temp Support can be used as a break-away support with the following materials:

• PEKK
• PEEK
• Ultem PEI
• PPSU
• PSU
• PPS

Print industrial-grade parts with Gearbox HT2 High-Temp 3D Printer. Check it out HERE.

Filament Specifications:

• Diameter: 1.75mm (+/- 0.05mm)
• Colour: Natural
• Reel quantity: 250g, 500g, larger reels available upon special request

Recommended Print Conditions: (starting points)

• Extruder Temp: 350 – 380?C (all-metal extruder)
• Bed Temp: 120-160?C
• Bed Prep: Ultem? Tape, Polyimide Tape, Lightly sanded FR4 or Perf board.
• Cooling: No cooling fan
• Print Speed: Print speeds of 30mm/s (starting point).
• Heated Enclosure: All high-temp materials print better within a heated enclosure or in a warm build environment. Enclosure temp should not exceed 185?C for our HTS to remain structurally sound as a support.
• Support Removal: This is a break-away support and is NOT soluble. The support is best removed while the part is warm. If the part cools and support removal becomes difficult, then you can heat the part in a small oven (toaster oven or similar) for 30-45 minutes; then removal will be much easier. Chamber or oven should not exceed the Tg of the model material that you are printing with.

For a list of 3D printers that are capable of printing high temperature materials such as ULTEM or PEEK view here. https://www.aniwaa.com/best-peek-3d-printer-pei-ultem/